Straight Pipes (ASME B31.12 par. IP-3.2.1)
Design conditions
Project name
Design pressure
P = [MPa]
Design temperature
T = [°C]
Material
Name
Basic allowable stress
S = [MPa]
Component geometry
Diameter
D = [mm]
Thickness
tnom = [mm]
Factors/Tolerances
Quality factor
E = [-]
Material performance factor
Mf = [-]
Mechanical allowances
c = [mm]
Manufacturer's thickness tolerance
Mill = [%]
Coefficient
Y = [-]
Condition (P/SE ≤ 0.385)
-
Results
Minimum wall thickness
T = [mm]
Pressure design thickness
t = [mm]
Minimum required thickness
tm = [mm]
Condition (T ≥ tm)
-
Maximum allowable pressure
MAWP = [MPa]